Author Index

A

  • Abdollahi, M. Improvement in the Performance of Potato Starch Used in the Water-Based Drilling Fluid via Its Chemical Modification by Grafting Copolymerization [Volume 22, Issue 4, 2009, Pages 251-260]
  • Abdollahi, M. Poly(vinyl acetate)-Based Block Copolymer/Clay Nanocomposites Prepared by In Situ Atom Transfer Radical Polymerization [Volume 22, Issue 4, 2009, Pages 295-308]
  • Abdollahi, M. Synthesis and Use of Amphoteric Carboxymethylcellulose Graft Copolymers in the Environmentally-acceptable Water-based DrillingFluids as a Water-sensitive Shale Stabilizer [Volume 22, Issue 6, 2010, Pages 483-493]
  • Abedini, H. Effective Parameters in the Design of a Loop Reactor for Bulk Propylene Polymerization with Z-N Catalyst [Volume 22, Issue 4, 2009, Pages 309-321]
  • Abolfathi, Ali Preparation of NR/BR Compound Using ZnO Nanoparticles [Volume 22, Issue 2, 2009, Pages 117-124]
  • Ahmadi, M.S. Development of Braiding-Pultrusion Method and Investigation of Mechanical Properties of Composite Rods Produced by this Method [Volume 22, Issue 2, 2009, Pages 141-149]
  • Ako, M. The Effect of Shear Rate on Dissolution of Gas and Cell Density in Continuous Foaming Process [Volume 22, Issue 3, 2009, Pages 209-215]
  • Almasi, H. Preparation and Study of Physical Properties of Starch-CMC Biodegradable Composite Film Containing Montmorillonite Nanoparticles [Volume 22, Issue 3, 2009, Pages 225-232]
  • Asadinezhad, A. Assessment of Melt Rheological Behavior of PTT/PE and PTT/PA 12 Blends by Emulsion and Micromechanical Models [Volume 22, Issue 5, 2010, Pages 399-407]
  • Astaraki, Mohammad hossein Preparation of NR/BR Compound Using ZnO Nanoparticles [Volume 22, Issue 2, 2009, Pages 117-124]
  • Ayatollahi, M.R. Investigation of Fracture in V-notched Brittle Polymers under Pure Shear Loading [Volume 22, Issue 1, 2009, Pages 63-73]

B

  • Baba Mohammadi, M. Effect of Composition and Type of Phenolic Resin on Mechanical Properties andMorphology of Phenolic Nanocomposites [Volume 22, Issue 6, 2010, Pages 421-428]
  • Badripour, M. Evaluation of EPDM Addition in NR/BR Compound by Reactive Mixing [Volume 22, Issue 5, 2010, Pages 331-339]
  • Bagheri-Khoulenjani, S. Effect of Fabrication Process Parameters on the Size of Gelatin/Nanohydroxyapatite Microspheres [Volume 22, Issue 4, 2009, Pages 285-294]
  • Bakhshandeh, Golamreza Preparation of NR/BR Compound Using ZnO Nanoparticles [Volume 22, Issue 2, 2009, Pages 117-124]
  • Bakhtiari, P. Blending of Hydrocarbon and Rosin Ester-basedResins to Study its Effect on the Physical andMechanical Properties of Thermoplastic Road Markings [Volume 22, Issue 6, 2010, Pages 457-467]
  • Bakhtiyari, S. Fire Behavior of Rigid Polyurethane Foam and Metal Faced Polyurethane Sandwich Panels and Its Fire Hazard Assessment [Volume 22, Issue 3, 2009, Pages 183-195]
  • Barikani, M. Fire Behavior of Rigid Polyurethane Foam and Metal Faced Polyurethane Sandwich Panels and Its Fire Hazard Assessment [Volume 22, Issue 3, 2009, Pages 183-195]
  • Barikani, Mehdi Evaluation of Adhesion Properties of Acrylic/Silicone Pressure Sensitive Adhesives Blends [Volume 22, Issue 2, 2009, Pages 97-105]
  • Barikani, Mehdi Preparation of NR/BR Compound Using ZnO Nanoparticles [Volume 22, Issue 2, 2009, Pages 117-124]
  • Barzin, J. Evaluation of Polymer Concentration Effect on Doxycycline Hyclate Drug Release from in SituForming System based on Poly(lactide-co-glycolide) [Volume 22, Issue 6, 2010, Pages 495-505]
  • Basiri, Mona Kinetic Investigation of Styrene Free Radical Polymerization by Using Binary Mixtures of Monofunctional Initiators [Volume 22, Issue 2, 2009, Pages 133-140]
  • Beheshty, M.H. Effect of Composition and Type of Phenolic Resin on Mechanical Properties andMorphology of Phenolic Nanocomposites [Volume 22, Issue 6, 2010, Pages 421-428]

D

  • Dabirian, F. Alignment of Electrospun Nanofibers and Prediction of Electrospinning Linear Speed Using a Rotating Jet [Volume 22, Issue 3, 2009, Pages 233-242]
  • Dariushi, S. An Investigation on Tensile Properties of Glass Fiber/Aluminium Laminates [Volume 22, Issue 1, 2009, Pages 31-39]

E

  • Ebrahimi, Gh. A Comparative Study on Creep Behavior of Wood Flour-Polypropylene Composite, Medium Density Fiberboard (MDF) and Particleboard [Volume 22, Issue 5, 2010, Pages 363-371]
  • Ebrahimi, Gh. Studies on Nano Barium Strontium Titanate/Cellulose Derivatives Composites [Volume 22, Issue 5, 2010, Pages 381-388]
  • Ehsani, M. Evaluation of EPDM Addition in NR/BR Compound by Reactive Mixing [Volume 22, Issue 5, 2010, Pages 331-339]
  • Ehsani, M. Assessment of Melt Rheological Behavior of PTT/PE and PTT/PA 12 Blends by Emulsion and Micromechanical Models [Volume 22, Issue 5, 2010, Pages 399-407]
  • Emami, M. Effective Parameters in the Design of a Loop Reactor for Bulk Propylene Polymerization with Z-N Catalyst [Volume 22, Issue 4, 2009, Pages 309-321]
  • Enayati, A.A. Thermal Properties of Wood-Plastic Composites Prepared from Hemicellulose-extracted Wood Flour [Volume 22, Issue 3, 2009, Pages 171-181]
  • Enhessari, M. Studies on Nano Barium Strontium Titanate/Cellulose Derivatives Composites [Volume 22, Issue 5, 2010, Pages 381-388]
  • Entezami, A.A. Preparation and Study of Physical Properties of Starch-CMC Biodegradable Composite Film Containing Montmorillonite Nanoparticles [Volume 22, Issue 3, 2009, Pages 225-232]
  • Entezami, A.A. Studies on Electroactivity, Conductivity and Solubility of 2-Anilinoethanol Homopolymer and its Aniline Copolymers Using Oxidation andElectrochemical Methods [Volume 22, Issue 6, 2010, Pages 447-455]
  • Esfandeh, M. Development of Braiding-Pultrusion Method and Investigation of Mechanical Properties of Composite Rods Produced by this Method [Volume 22, Issue 2, 2009, Pages 141-149]
  • Etrati-Khosroshahi, M Effect of Fabrication Process Parameters on the Size of Gelatin/Nanohydroxyapatite Microspheres [Volume 22, Issue 4, 2009, Pages 285-294]

F

  • Famili, M.H.N. The Effect of Shear Rate on Dissolution of Gas and Cell Density in Continuous Foaming Process [Volume 22, Issue 3, 2009, Pages 209-215]
  • Farajpoor, S. Synthesis of Ethylene Bis-stearamide for Acrylonitrile-Butadiene-Styrene Polymer [Volume 22, Issue 6, 2010, Pages 439-446]
  • Farrokhzad, H. Evaluation of Polymer Concentration Effect on Doxycycline Hyclate Drug Release from in SituForming System based on Poly(lactide-co-glycolide) [Volume 22, Issue 6, 2010, Pages 495-505]

G

  • Ghafelebashi-Zarand, S. mahdi Effect of Hydrogen and Comonomer on the Kinetics of Slurry Polymerization of Ethylene and Properties of Produced Polyethylene over TiCl4/MgCl2/AlEt3 Catalyst [Volume 22, Issue 1, 2009, Pages 3-10]
  • Ghaffarian, H.R. Synthesis of Ethylene Bis-stearamide for Acrylonitrile-Butadiene-Styrene Polymer [Volume 22, Issue 6, 2010, Pages 439-446]
  • Ghanbarzadeh, B. Preparation and Study of Physical Properties of Starch-CMC Biodegradable Composite Film Containing Montmorillonite Nanoparticles [Volume 22, Issue 3, 2009, Pages 225-232]
  • Ghasemi, A.R. Effect of Residual Thermal Stresses in Curing Process on the Deformation of Flat and Cylindrical Composite Laminates [Volume 22, Issue 1, 2009, Pages 21-30]
  • Ghasemi, I. Crystallization Behavior of PA6 in ABS/PA6 Blends Prepared by In Situ Polymerization and Compatibilization Method [Volume 22, Issue 6, 2010, Pages 469-482]
  • Ghoreishy, M.H.R. Evaluation of EPDM Addition in NR/BR Compound by Reactive Mixing [Volume 22, Issue 5, 2010, Pages 331-339]
  • Ghoreishy, M.H.R. An Experimental and Numerical Verification of Different Hyperelastic Material Models for Rubbers under Tension and Compression Loads [Volume 22, Issue 4, 2009, Pages 273-284]

H

  • Haddadi-Asl, V. Study of Atom Transfer Radical Polymerization of Styrene and Its Gel Effect by Monte Carlo Simulation Method [Volume 22, Issue 1, 2009, Pages 11-19]
  • Haddadi-Asl, V. Preparation of Polystyrene Nanocomposite by In Situ Atom Transfer Radical Polymerization: Study of Polymerization Kinetics in the Presence of Clay [Volume 22, Issue 4, 2009, Pages 261-272]
  • Haddadi-Asl, vahid Effect of Hydrogen and Comonomer on the Kinetics of Slurry Polymerization of Ethylene and Properties of Produced Polyethylene over TiCl4/MgCl2/AlEt3 Catalyst [Volume 22, Issue 1, 2009, Pages 3-10]
  • Haghayegh, M. Blending of Hydrocarbon and Rosin Ester-basedResins to Study its Effect on the Physical andMechanical Properties of Thermoplastic Road Markings [Volume 22, Issue 6, 2010, Pages 457-467]
  • Hajian, Morteza Preparation and Investigation of Mechanical Properties and Optical Clarity of Polyvinylbutyral Film [Volume 22, Issue 2, 2009, Pages 125-131]
  • Hakim, S. Ethylene Homopolymerization by Ziegler-Natta (TiCl4/MgCl2) Catalyst through Full Factorial Experimental Design [Volume 22, Issue 5, 2010, Pages 353-362]
  • Hamzeh, Y. Studies on Nano Barium Strontium Titanate/Cellulose Derivatives Composites [Volume 22, Issue 5, 2010, Pages 381-388]
  • Hosseinaei, O. Thermal Properties of Wood-Plastic Composites Prepared from Hemicellulose-extracted Wood Flour [Volume 22, Issue 3, 2009, Pages 171-181]

J

  • Jafari, S.H. Assessment of Melt Rheological Behavior of PTT/PE and PTT/PA 12 Blends by Emulsion and Micromechanical Models [Volume 22, Issue 5, 2010, Pages 399-407]
  • Johari, M.S. Development of Braiding-Pultrusion Method and Investigation of Mechanical Properties of Composite Rods Produced by this Method [Volume 22, Issue 2, 2009, Pages 141-149]

K

  • Kabiri, Koroush Long-Chain Diacrylate Crosslinkers and Use of PEG Crosslinks in Poly(potassium acrylate-acrylic acid)/Kaolin Composite Superabsorbents [Volume 22, Issue 2, 2009, Pages 107-116]
  • Kamal, M.R. Effects of Different Types of Clays and Maleic Anhydride Modified Polystyrene on Polystyrene/Clay Nanocomposites [Volume 22, Issue 2, 2009, Pages 151-157]
  • Kazemi Najafi, S. A Comparative Study on Creep Behavior of Wood Flour-Polypropylene Composite, Medium Density Fiberboard (MDF) and Particleboard [Volume 22, Issue 5, 2010, Pages 363-371]
  • Khamforoush, M. Alignment of Electrospun Nanofibers and Prediction of Electrospinning Linear Speed Using a Rotating Jet [Volume 22, Issue 3, 2009, Pages 233-242]
  • Khazaie, Ardeshir Kinetic Investigation of Styrene Free Radical Polymerization by Using Binary Mixtures of Monofunctional Initiators [Volume 22, Issue 2, 2009, Pages 133-140]
  • Khonakdar, H.A. Assessment of Melt Rheological Behavior of PTT/PE and PTT/PA 12 Blends by Emulsion and Micromechanical Models [Volume 22, Issue 5, 2010, Pages 399-407]

M

  • Majedi, S. Alignment of Electrospun Nanofibers and Prediction of Electrospinning Linear Speed Using a Rotating Jet [Volume 22, Issue 3, 2009, Pages 233-242]
  • Marandi, reza Effect of Hydrogen and Comonomer on the Kinetics of Slurry Polymerization of Ethylene and Properties of Produced Polyethylene over TiCl4/MgCl2/AlEt3 Catalyst [Volume 22, Issue 1, 2009, Pages 3-10]
  • Mashhadi-Hasan-Shirazi, mahshid Effect of Hydrogen and Comonomer on the Kinetics of Slurry Polymerization of Ethylene and Properties of Produced Polyethylene over TiCl4/MgCl2/AlEt3 Catalyst [Volume 22, Issue 1, 2009, Pages 3-10]
  • Massoumi, B. Studies on Electroactivity, Conductivity and Solubility of 2-Anilinoethanol Homopolymer and its Aniline Copolymers Using Oxidation andElectrochemical Methods [Volume 22, Issue 6, 2010, Pages 447-455]
  • Mehrabzadeh, M. Effects of Different Types of Clays and Maleic Anhydride Modified Polystyrene on Polystyrene/Clay Nanocomposites [Volume 22, Issue 2, 2009, Pages 151-157]
  • Mirabedini, S.M. Blending of Hydrocarbon and Rosin Ester-basedResins to Study its Effect on the Physical andMechanical Properties of Thermoplastic Road Markings [Volume 22, Issue 6, 2010, Pages 457-467]
  • Mirshokraie, S.A. Thermal Properties of Wood-Plastic Composites Prepared from Hemicellulose-extracted Wood Flour [Volume 22, Issue 3, 2009, Pages 171-181]
  • Mirzadeh, H. Effect of Fabrication Process Parameters on the Size of Gelatin/Nanohydroxyapatite Microspheres [Volume 22, Issue 4, 2009, Pages 285-294]
  • Mirzadeh, Hamid Evaluation of Adhesion Properties of Acrylic/Silicone Pressure Sensitive Adhesives Blends [Volume 22, Issue 2, 2009, Pages 97-105]
  • Moballegh, L. Ethylene Homopolymerization by Ziegler-Natta (TiCl4/MgCl2) Catalyst through Full Factorial Experimental Design [Volume 22, Issue 5, 2010, Pages 353-362]
  • Mobedi, H. Evaluation of Polymer Concentration Effect on Doxycycline Hyclate Drug Release from in SituForming System based on Poly(lactide-co-glycolide) [Volume 22, Issue 6, 2010, Pages 495-505]
  • Mohamadnia, F. Functionality Effect of Pressure Sensitive Adhesives on In Vitro Drug Release Behavior of Fentanyl Drug in an Adhesive Patch [Volume 22, Issue 6, 2010, Pages 429-437]
  • Mohammadian-Gezaz, S. Crystallization Behavior of PA6 in ABS/PA6 Blends Prepared by In Situ Polymerization and Compatibilization Method [Volume 22, Issue 6, 2010, Pages 469-482]
  • Montazer, M. Concurrent Antimicrobial and Anticrease of Bleached and Cationic Cotton Using Nano Titanium Dioxide and Butane Tetracarboxylic Acid [Volume 22, Issue 1, 2009, Pages 41-51]
  • Mortazavi, M.M. Ethylene Homopolymerization by Ziegler-Natta (TiCl4/MgCl2) Catalyst through Full Factorial Experimental Design [Volume 22, Issue 5, 2010, Pages 353-362]
  • Mousazadeh, S. The Effects of Reaction Variables on Solution Polymerization of Vinyl Acetate and Molecular Weight of Poly(vinyl alcohol) Using Taguchi Experimental Design [Volume 22, Issue 5, 2010, Pages 341-351]

N

  • Naderi, G. Effect of Composition and Type of Phenolic Resin on Mechanical Properties andMorphology of Phenolic Nanocomposites [Volume 22, Issue 6, 2010, Pages 421-428]
  • Naderi, Gasem Preparation of NR/BR Compound Using ZnO Nanoparticles [Volume 22, Issue 2, 2009, Pages 117-124]
  • Nafisi, Siavash Long-Chain Diacrylate Crosslinkers and Use of PEG Crosslinks in Poly(potassium acrylate-acrylic acid)/Kaolin Composite Superabsorbents [Volume 22, Issue 2, 2009, Pages 107-116]
  • Najafi, M. Study of Atom Transfer Radical Polymerization of Styrene and Its Gel Effect by Monte Carlo Simulation Method [Volume 22, Issue 1, 2009, Pages 11-19]
  • Najafi, M. Preparation of Polystyrene Nanocomposite by In Situ Atom Transfer Radical Polymerization: Study of Polymerization Kinetics in the Presence of Clay [Volume 22, Issue 4, 2009, Pages 261-272]
  • Najafian, Sh. Studies on Electroactivity, Conductivity and Solubility of 2-Anilinoethanol Homopolymer and its Aniline Copolymers Using Oxidation andElectrochemical Methods [Volume 22, Issue 6, 2010, Pages 447-455]
  • Nasiri, A. Improvement in the Performance of Potato Starch Used in the Water-Based Drilling Fluid via Its Chemical Modification by Grafting Copolymerization [Volume 22, Issue 4, 2009, Pages 251-260]
  • Nasiri, A.R. Synthesis and Use of Amphoteric Carboxymethylcellulose Graft Copolymers in the Environmentally-acceptable Water-based DrillingFluids as a Water-sensitive Shale Stabilizer [Volume 22, Issue 6, 2010, Pages 483-493]
  • Navarchian, M.H. The Effects of Reaction Variables on Solution Polymerization of Vinyl Acetate and Molecular Weight of Poly(vinyl alcohol) Using Taguchi Experimental Design [Volume 22, Issue 5, 2010, Pages 341-351]
  • Nazari, A. Concurrent Antimicrobial and Anticrease of Bleached and Cationic Cotton Using Nano Titanium Dioxide and Butane Tetracarboxylic Acid [Volume 22, Issue 1, 2009, Pages 41-51]
  • Nekoomanesh, Mehdi Kinetic Investigation of Styrene Free Radical Polymerization by Using Binary Mixtures of Monofunctional Initiators [Volume 22, Issue 2, 2009, Pages 133-140]
  • Nekoomanesh Haghighi, M. Ethylene Homopolymerization by Ziegler-Natta (TiCl4/MgCl2) Catalyst through Full Factorial Experimental Design [Volume 22, Issue 5, 2010, Pages 353-362]
  • Nikrai, J. A Comparative Study on Creep Behavior of Wood Flour-Polypropylene Composite, Medium Density Fiberboard (MDF) and Particleboard [Volume 22, Issue 5, 2010, Pages 363-371]
  • Nouri, M. Structural Characterization of Electrically Conductive Nanofibers of Polyaniline/Copolyacrylonitrile Blend [Volume 22, Issue 3, 2009, Pages 217-224]
  • Nouri, M. The Electrical Conductivity of Stretched Polyaniline and Polypyrrole Coated Yarns [Volume 22, Issue 5, 2010, Pages 373-379]

O

  • Oromiehie, A.R. Crystallization Behavior of PA6 in ABS/PA6 Blends Prepared by In Situ Polymerization and Compatibilization Method [Volume 22, Issue 6, 2010, Pages 469-482]

P

  • Parvin, Ali Preparation of NR/BR Compound Using ZnO Nanoparticles [Volume 22, Issue 2, 2009, Pages 117-124]
  • Poorkhalil, A. Evaluation of Polymer Concentration Effect on Doxycycline Hyclate Drug Release from in SituForming System based on Poly(lactide-co-glycolide) [Volume 22, Issue 6, 2010, Pages 495-505]

R

  • Rafipoor, Majid Preparation of Composite Hydrogel Based on Polyacrylamide and the Effect of Kaolinite on Its Properties in the Reservoir Conditions [Volume 22, Issue 2, 2009, Pages 87-95]
  • Rahbari, A.H. Studies on Nano Barium Strontium Titanate/Cellulose Derivatives Composites [Volume 22, Issue 5, 2010, Pages 381-388]
  • Rahimi, M.K. Concurrent Antimicrobial and Anticrease of Bleached and Cationic Cotton Using Nano Titanium Dioxide and Butane Tetracarboxylic Acid [Volume 22, Issue 1, 2009, Pages 41-51]
  • Rastgoo, Mehdi Preparation and Investigation of Mechanical Properties and Optical Clarity of Polyvinylbutyral Film [Volume 22, Issue 2, 2009, Pages 125-131]
  • Razavi-Nouri, M. Effect of Single-walled Carbon Nanotubes on Non-isothermal Crystallization Kinetics of Polypropylene: Comparison of Ozawa and CazĂ©-Chuah Methods [Volume 22, Issue 1, 2009, Pages 53-61]
  • Razzaghi Kashani, Mehdi Preparation of Composite Hydrogel Based on Polyacrylamide and the Effect of Kaolinite on Its Properties in the Reservoir Conditions [Volume 22, Issue 2, 2009, Pages 87-95]
  • Rekabdar, F. Synthesis and Use of Amphoteric Carboxymethylcellulose Graft Copolymers in the Environmentally-acceptable Water-based DrillingFluids as a Water-sensitive Shale Stabilizer [Volume 22, Issue 6, 2010, Pages 483-493]
  • Roghani-Mamaqani, H. Preparation of Polystyrene Nanocomposite by In Situ Atom Transfer Radical Polymerization: Study of Polymerization Kinetics in the Presence of Clay [Volume 22, Issue 4, 2009, Pages 261-272]
  • Rostami Daronkola, M.R. Thermal Property and Microstructures of Poly(VAc-b-MA) and PVAc-b-Poly(MA-co-MMA) Block Copolymers and Terpolymers [Volume 22, Issue 3, 2009, Pages 197-207]
  • Roughani Mamaghani, H. Study of Atom Transfer Radical Polymerization of Styrene and Its Gel Effect by Monte Carlo Simulation Method [Volume 22, Issue 1, 2009, Pages 11-19]

S

  • Sadighi, M. Development of Braiding-Pultrusion Method and Investigation of Mechanical Properties of Composite Rods Produced by this Method [Volume 22, Issue 2, 2009, Pages 141-149]
  • Sadighi, M. An Investigation on Tensile Properties of Glass Fiber/Aluminium Laminates [Volume 22, Issue 1, 2009, Pages 31-39]
  • Saeidi, M. Synthesis of Ethylene Bis-stearamide for Acrylonitrile-Butadiene-Styrene Polymer [Volume 22, Issue 6, 2010, Pages 439-446]
  • Salami-Kalajahi, M. Study of Atom Transfer Radical Polymerization of Styrene and Its Gel Effect by Monte Carlo Simulation Method [Volume 22, Issue 1, 2009, Pages 11-19]
  • Salami-Kalajahi, M. Preparation of Polystyrene Nanocomposite by In Situ Atom Transfer Radical Polymerization: Study of Polymerization Kinetics in the Presence of Clay [Volume 22, Issue 4, 2009, Pages 261-272]
  • Salami-Kalajahi, mahdi Effect of Hydrogen and Comonomer on the Kinetics of Slurry Polymerization of Ethylene and Properties of Produced Polyethylene over TiCl4/MgCl2/AlEt3 Catalyst [Volume 22, Issue 1, 2009, Pages 3-10]
  • Salimi, Farhad Preparation of Composite Hydrogel Based on Polyacrylamide and the Effect of Kaolinite on Its Properties in the Reservoir Conditions [Volume 22, Issue 2, 2009, Pages 87-95]
  • Saraei, M. Studies on Electroactivity, Conductivity and Solubility of 2-Anilinoethanol Homopolymer and its Aniline Copolymers Using Oxidation andElectrochemical Methods [Volume 22, Issue 6, 2010, Pages 447-455]
  • Sayyadnejad, M.A. Synthesis of Ethylene Bis-stearamide for Acrylonitrile-Butadiene-Styrene Polymer [Volume 22, Issue 6, 2010, Pages 439-446]
  • Semsarzadeh, M.A. Thermal Property and Microstructures of Poly(VAc-b-MA) and PVAc-b-Poly(MA-co-MMA) Block Copolymers and Terpolymers [Volume 22, Issue 3, 2009, Pages 197-207]
  • Semsarzadeh, M.A. Poly(vinyl acetate)-Based Block Copolymer/Clay Nanocomposites Prepared by In Situ Atom Transfer Radical Polymerization [Volume 22, Issue 4, 2009, Pages 295-308]
  • Shabani, Sh. Blending of Hydrocarbon and Rosin Ester-basedResins to Study its Effect on the Physical andMechanical Properties of Thermoplastic Road Markings [Volume 22, Issue 6, 2010, Pages 457-467]
  • Shahrokhi, M. Effective Parameters in the Design of a Loop Reactor for Bulk Propylene Polymerization with Z-N Catalyst [Volume 22, Issue 4, 2009, Pages 309-321]
  • Sharifi, M. Blending of Hydrocarbon and Rosin Ester-basedResins to Study its Effect on the Physical andMechanical Properties of Thermoplastic Road Markings [Volume 22, Issue 6, 2010, Pages 457-467]
  • Soroushnia, A. Functionality Effect of Pressure Sensitive Adhesives on In Vitro Drug Release Behavior of Fentanyl Drug in an Adhesive Patch [Volume 22, Issue 6, 2010, Pages 429-437]
  • Soroushnia, Arezo Evaluation of Adhesion Properties of Acrylic/Silicone Pressure Sensitive Adhesives Blends [Volume 22, Issue 2, 2009, Pages 97-105]

T

  • Taghiakbari, L. Fire Behavior of Rigid Polyurethane Foam and Metal Faced Polyurethane Sandwich Panels and Its Fire Hazard Assessment [Volume 22, Issue 3, 2009, Pages 183-195]
  • Taghizadeh, S.M. Functionality Effect of Pressure Sensitive Adhesives on In Vitro Drug Release Behavior of Fentanyl Drug in an Adhesive Patch [Volume 22, Issue 6, 2010, Pages 429-437]
  • Taghizadeh, S.Mojtaba Evaluation of Adhesion Properties of Acrylic/Silicone Pressure Sensitive Adhesives Blends [Volume 22, Issue 2, 2009, Pages 97-105]
  • Tajdari, M. An Investigation on Tensile Properties of Glass Fiber/Aluminium Laminates [Volume 22, Issue 1, 2009, Pages 31-39]
  • Tajvidi, M. Thermal Properties of Wood-Plastic Composites Prepared from Hemicellulose-extracted Wood Flour [Volume 22, Issue 3, 2009, Pages 171-181]
  • Torabi, A.R. Investigation of Fracture in V-notched Brittle Polymers under Pure Shear Loading [Volume 22, Issue 1, 2009, Pages 63-73]

V

  • Vafaie, Mohsen Preparation of Composite Hydrogel Based on Polyacrylamide and the Effect of Kaolinite on Its Properties in the Reservoir Conditions [Volume 22, Issue 2, 2009, Pages 87-95]
  • Varamesh, A. Improvement in the Performance of Potato Starch Used in the Water-Based Drilling Fluid via Its Chemical Modification by Grafting Copolymerization [Volume 22, Issue 4, 2009, Pages 251-260]
  • Varamesh, A. Synthesis and Use of Amphoteric Carboxymethylcellulose Graft Copolymers in the Environmentally-acceptable Water-based DrillingFluids as a Water-sensitive Shale Stabilizer [Volume 22, Issue 6, 2010, Pages 483-493]

W

  • Wang, S. Thermal Properties of Wood-Plastic Composites Prepared from Hemicellulose-extracted Wood Flour [Volume 22, Issue 3, 2009, Pages 171-181]

Y

  • Yasami, A. Effect of Residual Thermal Stresses in Curing Process on the Deformation of Flat and Cylindrical Composite Laminates [Volume 22, Issue 1, 2009, Pages 21-30]
  • Yousefi, Ali Akbar Long-Chain Diacrylate Crosslinkers and Use of PEG Crosslinks in Poly(potassium acrylate-acrylic acid)/Kaolin Composite Superabsorbents [Volume 22, Issue 2, 2009, Pages 107-116]

Z

  • Ziaee, F. Characterization and Thermal Rearrangement Investigation of 1,4-Polybutadiene by Nuclear Magnetic Resonance Spectroscopy [Volume 22, Issue 5, 2010, Pages 389-398]
  • Ziaee, Farshid Kinetic Investigation of Styrene Free Radical Polymerization by Using Binary Mixtures of Monofunctional Initiators [Volume 22, Issue 2, 2009, Pages 133-140]
  • Zohuriaan-Mehr, Mohammad jalaledin Long-Chain Diacrylate Crosslinkers and Use of PEG Crosslinks in Poly(potassium acrylate-acrylic acid)/Kaolin Composite Superabsorbents [Volume 22, Issue 2, 2009, Pages 107-116]